Skip to main content

​
Watching Your Footage

It should be easy to watch your footage by doing the following:
  1. Go to Sessions in the left-hand menu.
  2. Click on the match or training session in question.
  3. You should be met with the video to watch.

​
Keyboard Shortcuts

In the session viewer, Space plays and pauses. The left and right arrows move 5 seconds and comma and full stop step one frame. Hold the up or down arrow for slow motion. Plus and minus change the speed. M mutes, C turns subtitles on and off, and F goes full screen. Tab jumps to the next event in the Events panel and Shift + Tab to the previous one. E shows or hides the Events panel, and R turns Recap Mode on and off. Scroll to zoom into the picture and double-click it to reset the zoom.

​
Skipping Dead Time (Recap Mode)

When you watch a match in the session viewer, Framesports can skip the dead time between phases of play so you only watch the action. Look for the Recap switch in the player controls, next to the mute button (on a phone it is under the settings cog). It only appears once the match has been analysed and there is dead time to skip:
  • Skip downtime: the player jumps past the gaps between events and lands a couple of seconds before each next bit of action. The skipped spans are dimmed on the progress bar.
  • Show downtime: click the toggle again to play the footage in full, including the dead time.
If you scrub back to review a dead moment yourself, Recap Mode briefly holds off skipping so it doesn’t immediately jump you forward again.

​
Adding Custom Clips

To create custom clips in footage, do the following:
  1. Go to Sessions in the left-hand menu.
  2. Click on the match or training session in question.
  3. Click Clip on the right-hand sidebar.
  4. Use the scrollbar to adjust the duration of your custom clip.
  5. Press Save Clip and select if you want your whole club to be able to see your clip or to keep your clip private.

​
Downloading a Clip

You can download an individual clip as a video file to share or use elsewhere:
  1. Go to Sessions in the left-hand menu and click on the session.
  2. Find the event or clip you want on the right-hand sidebar.
  3. Click the three dots (⋮) on it and press Download clip.
  4. Trim the start and end if you want, then press Download. Larger clips can take a moment to prepare.
Clips download as a standard MP4 video that plays anywhere.

​
Filtering Clips

It should be easy to filter clips to custom events (e.g. only your custom tagged clips, only your dominant carries, only 22m entries, etc.) by doing the following:
  1. Go to Sessions in the left-hand menu.
  2. Click on the match or training session in question.
  3. Click the Filter icon on the right-hand sidebar.
  4. Select the event you want to filter by.
  5. Press Filter and only those events should appear.
Note: You can use the Tab shortcut on your keyboard to jump through events.

​
Checking Who an Event Is On

An event says a jersey number. To see who was actually wearing it, click the three dots (⋯) next to the event in the session viewer and choose View player. That shows photos of that shirt taken from your own footage during analysis, so you can check the attribution before you change anything. View player only appears when photos were taken of that jersey during the match. If an event is on the wrong player, reassign it from the same menu. If the session is wrong throughout, report the session instead of correcting clip after clip.

​
Adjusting Clip Duration

  1. Go to Sessions in the left-hand menu.
  2. Click on the match or training session in question.
  3. Click on the three dots (⋮) on the event in question.
  4. Press Add to presentation, then select that clip and add it to a presentation.
  5. In the presentation, press the three dots (⋮) on the clip’s slide and press Edit duration.
  6. Use the scrollbars to adjust the clip’s duration.

​
Sharing Clips

  1. Go to Sessions in the left-hand menu.
  2. Click on the match or training session in question.
  3. Click on the three dots (⋮) on the event in question.
  4. Press Add to presentation, then select that clip and add it to a presentation.
  5. Use the comments section on the right-hand side of the presentation to @ that user in Framesports. That user will then receive an automated email and WhatsApp as soon as you message them.

​
Moving Clips Between Presentations

This can be done using the Framesports multi-match clips database by doing the following:
  1. Open a presentation.
  2. Click New slide and choose Clip.
  3. The clips database will then appear. Click the Filter icon in the top right corner to select which session(s) clips are being pulled from. Each clip is named after what happened in it, and a lineout or scrum also says how it went, such as Lineout Won or Scrum Lost.
  4. Select the clips you had in mind from individual sessions or across sessions to add them to your presentation.

​
Frequently Asked Questions

It should be easy to watch your footage by doing the following:
  1. Go to Sessions in the left-hand menu.
  2. Click on the match or training session in question.
  3. You should be met with the video to watch.
In the session viewer, click the Recap switch in the player controls, next to the mute button (on a phone it is under the settings cog). It only appears once the match has been analysed and there is dead time to skip:
  • Skip downtime plays only the action, jumping past the gaps between phases and landing just before each next event. Skipped spans are dimmed on the progress bar.
  • Show downtime plays the footage in full.
If you scrub back to review a dead moment yourself, Recap Mode briefly holds off skipping so it doesn’t jump you forward again.
To create custom clips in footage, do the following:
  1. Go to Sessions in the left-hand menu.
  2. Click on the match or training session in question.
  3. Click Clip on the right-hand sidebar.
  4. Use the scrollbar to adjust the duration of your custom clip.
  5. Press Save Clip and select if you want your whole club to be able to see your clip or to keep your clip private.
  1. Go to Sessions in the left-hand menu and click on the session.
  2. Find the event or clip you want on the right-hand sidebar.
  3. Click the three dots (⋮) on it and press Download clip.
  4. Trim the start and end if you want, then press Download. Larger clips can take a moment to prepare.
Clips download as a standard MP4 video that plays anywhere.
It should be easy to filter clips to custom events (e.g. only your custom tagged clips, only your dominant carries, only 22m entries, etc.) by doing the following:
  1. Go to Sessions in the left-hand menu.
  2. Click on the match or training session in question.
  3. Click the Filter icon on the right-hand sidebar.
  4. Select the event you want to filter by.
  5. Press Filter and only those events should appear.
Note: You can use the Tab shortcut on your keyboard to jump through events.
  1. Go to Sessions in the left-hand menu.
  2. Click on the match or training session in question.
  3. Click on the three dots (⋮) on the event in question.
  4. Press Add to presentation, then select that clip and add it to a presentation.
  5. In the presentation, press the three dots (⋮) on the clip’s slide and press Edit duration.
  6. Use the scrollbars to adjust the clip’s duration.
  1. Go to Sessions in the left-hand menu.
  2. Click on the match or training session in question.
  3. Click on the three dots (⋮) on the event in question.
  4. Press Add to presentation, then select that clip and add it to a presentation.
  5. Use the comments section on the right-hand side of the presentation to @ that user in Framesports. That user will then receive an automated email and WhatsApp as soon as you message them.
This can be done using the Framesports multi-match clips database by doing the following:
  1. Open a presentation.
  2. Click New slide and choose Clip.
  3. The clips database will then appear. Click the Filter icon in the top right corner to select which session(s) clips are being pulled from. Each clip is named after what happened in it, and a lineout or scrum also says how it went, such as Lineout Won or Scrum Lost.
  4. Select the clips you had in mind from individual sessions or across sessions to add them to your presentation.
Can’t find what you’re looking for? Choose Contact us from the menu under your name in the sidebar, or email support@framesports.ai.